Changing The Side Brush - HAKO Scrubmaster B260 R Operating Manual

5.6.2

Changing the side brush

57
B
Fig. 45:
Assembling the side brush
1. Place the machine on a level surface.
2. Raise the side brush unit with key Side brush unit Fig. 44-57.
3. Fit the side brush Fig. 45-A to the hub Fig. 45-B.
4. Position the carrier plate Fig. 45-C in such a way that the pin of the hub
Fig. 45-D goes through the hole of the carrier plate and the carrier plate is
sitting firmly in the holder.
5. Secure carrier plate to hub with washer and wing bolt Fig. 45-E.
The side brush is dismantled in the reverse order.
05-7182-01.fm
D
E
A
Maintenance and Servicing
C
85