HAKO Scrubmaster B25 Quick Start Manual

Hako Scrubmaster B25
2
3
1. Disconnect mains plug of the charger from outlet and fasten to holder
2. Pull the filling opening cap
water tank 3.
3. Turn the machine on by keeping button
4. Adjust the height of the operating bar with the locking lever 6.
5. Switch suction turbine on with button
display) and water with button
6. Use the starting handle
7. Push the machine forwards. Use button
necesssary).
Quolified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for authomatic machines (low-foaming)!
Please pay attention to the informations in the instruction manual!
12
12
6
9
8

OPERATION:

2
Control the filling level by the filling level indicator
12 to switch on the cleaning functions.
NOTE! Make sure that pad/brush is installed!!!
towards you and remove it and fill the clear
5 pressed approx. 3 sec.
8 (corresponding symbol
10 (corresponding symbol
10 to adjust the water (if
11
10
5
4.
9 in the
11 in the display).
1
4
1.