Battery Plug Coding - HAKO Scrubmaster B260 R Operating Manual

6. Slowly lift the battery trough upwards and swivel out to the side.
Assembly is in reverse order.
Note
Please ensure that the trough battery is in the correct installation
position! See connecting diagram Fig. 27-B.
5.2.5

Battery plug coding

When using other batteries which have been approved by Hako, the plugs
must be re-coded.
The plug connectors between the battery Fig. 28-A, the machine Fig. 28-B
and the charger Fig. 28-C are coded with coloured coded pins (yellow, grey or
green) Fig. 28-D depending on the type of battery and rated voltage.
A
B
Fig. 28:
The following three prerequisites must be met for the whole system:
• Voltage coding (36 V) must be identical for all plugs and bushes.
• The colour of the coded pin in the connector housing of the machine is
always yellow.
• The colour of the coded pin in the charger plug (machines without built-in
charger) and in the bush housing of the battery must be identical:
• Grey for wet batteries
• Green for maintenance-free gel batteries
Warning
Risk of short circuit! The coding of the plugs should only be carried
out by a workshop authorised by Hako!
05-7182-01.fm
Maintenance and Servicing
D
36 V
C
73