2.3
Multifunction display
The functions and indicators of the machine are set and displayed with the
multifunction display. After the machine is switched on, the operating system
and data are loaded and the start screen appears on the display. After several
seconds the view changes, and the main menu Fig. 7-A appears. By select-
ing and confirming the soft key Menu selection Fig. 7-B you are taken to the
sub-menu Fig. 7-C.
Note
It is only possible to switch to the sub-menu if the cleaning functions
are switched off!
A
Fig. 7:
2.3.1
Menu guidance
The menu is operated with the turn-push knob Fig. 7-D.
Menus and sub-menus are selected in the multifunction display and the indi-
vidual menu item values are set or changed with the turn-push knob. The
following basically applies:
• Turn to select a menu item. The selected menu item is displayed with a
yellow border.
• Push to activate a menu item.
You can jump back to the previous menu using the return button Fig. 7-E.
02-7182-01.fm
E
B
Operation
D
C
31