Cleaning The Coarse Dirt Sieve; Cleaning The Intake Sieve; Checking The Seal At The Drain Valve - HAKO Scrubmaster B260 R Operating Manual

Maintenance and Servicing
5.4.3

Cleaning the coarse dirt sieve

A coarse dirt sieve Fig. 36-36 is optionally located in the waste water
tank.Clean the sieve daily and as required.
Fig. 36:
5.4.4

Cleaning the intake sieve

Check the function of the intake sieve Fig. 37-38 daily and clean it as
required.
A
Fig. 37:
1. Rotate the locks Fig. 37-A downwards and remove the intake sieve
Fig. 37-38.
2. Thoroughly clean the intake sieve under running water.
5.4.5

Checking the seal at the drain valve

Check the function of the seal in the drain valve Fig. 38-A daily, and replace it
after no more than 125 operating hours.
Fig. 38:
1. Twist drain valve by 90° and swivel down from drain hose.
2. Change the seal.
3. Grease seal and cone with Molykote.
80
B
A
38
36
A
05-7182-01.fm