Squeegee; Cleaning The Squeegee; Changing The Sealing Strips - HAKO Hakomatic B 650 R Instruction Manual

5. Take into operation

5.6 Squeegee

1 Squeegee
2 Star-shaped knob
3 Screw for angle adjustment
4 Suction hose
5 Fastening device
6 Washers for height adjustment
Fig. 1
22

5.6.1 Cleaning the Squeegee

Check the squeegee (Fig. 1/1) daily
and clean as necessary.
To clean it lift the squeegee out, pull off
the suction hose (Fig. 1/4), loosen the
two star-shaped knobs (Fig. 1/2) and
remove the squeegee.

5.6.2 Changing the Sealing Strips

Check the inner and outer sealing
strips on the squeegee (Fig. 1/1) wee-
kly for signs of wear. The sealing strips
can be used fourfold by turning them.
1. Lift the squeegee out.
2. Pull off the suction hose, loosen the
two star-shaped knobs and remove
the squeegee.
3. Unlock the fastening device (Fig.
1/5) and remove the outer sealing
strip. Turn the sealing strip or install
a new one, as necessary. Change
the inner sealing strip in the same
way.