Cleaning - HAKO Scrubmaster B260 R Operating Manual

3.4

Cleaning

Attention
• Before operating the machine, read and observe the safety
instructions in chapter 1.
• The machine can only be put into service when the driver is sitting
on the driver's seat.
• The travel drive can only be started if the accelerator pedal is not
being actuated when the machine is turned on.
Description
1 Turn on the machine.
2 Activate access authorization using the iButton Key (optional).
3 Use the driving direction selection button to select the driving
direction.
4 Select the cleaning programme.
5 Actuate the accelerator pedal. The brush unit and the water
supply are switched on with the last selected setting.
6 If necessary, switch on the fresh water supply.
7 Set the fresh water quantity in the multifunction display using
soft key Fresh water dosing.
8 In the event of heavy soiling, increase the brush pressure
using soft key Brush pressure in the multifunction display or
press the Boost button for 1 minute.
03-7182-01.fm
Operation
51