HAKO Scrubmaster B260 R Operating Manual page 18

Safety instructions
Label – Company logo Fig. 1/Fig. 2-A
The Hako logo is located at the front on the steering column and at the rear on
the hopper.
Label
– Read and observe the operating manual Fig. 1-B1
– Maximum permissible slope 6 % when cleaning Fig. 1-B2
– Never clean the machine with a high-pressure cleaner Fig. 1-B3
The label is located on the left hand side next to the driver's seat.
Label – Maintenance parts (yellow dot) Fig. 2-C
The yellow dot is located on the cover of the fresh water filter.
Type plate Fig. 2-D
The type plate is located in front of the left front wheel.
Label – Explosive gases Fig. 1-E
The label is in the battery compartment.
Label – 36 V Fig. 1-F
The label is in the battery compartment.
Label – QR code Fig. 2-G
The label is located on the control panel.
Label – Drain waste water Fig. 2-H
The label is located on the drain hose of the waste water tank.
Label – Drain fresh water Fig. 2-I
The label is located on the drain hose of the solution tank.
Label – Keep off! Fig. 2-J
The label is located on the rotating brush or roller brush unit.
Label – Leave seat console open during the charging procedure! Fig. 2-K
There is a label in the battery compartment.
Label – X-AC-drive Fig. 2-L
For machines with X-AC-drives, the label is located on the control panel.
Label – Avoid looking directly at the light!
The label is located on the Blue Spot (option).
Printing – Do not dispose of AntiBac® tanks in the domestic
waste! Fig. 2-N
The printing is located on the AntiBac® tanks.
18
01-7182-01.fm