Parking The Pre-Sweep Suction Unit; Overhead Guard - HAKO Scrubmaster B260 R Operating Manual

4. Check the cylindrical brush compartment for contamination and remove if
necessary.
5. Clean the pre-sweep suction unit if necessary.
6.4.6

Parking the pre-sweep suction unit

A
Fig. 64:
1. Unplug the plug at the machine side and plug into the retaining hole
Fig. 64-A.
2. Move the lever to the change/parking position Fig. 64-B.
3. Park the pre-sweep suction unit on a level surface and in a dry, clean
location.
6.5

Overhead guard

A
Fig. 65:
The overhead guard Fig. 65-A is used to protect the driver from falling parts in
the high bay warehouse, for example.
An optional side mirror Fig. 65-B is available.
06-7182-01.fm
B
Attachments/options
B
103