Intended Use; Notes On Warranty - HAKO Scrubmaster B260 R Operating Manual

Introduction

Intended use

Scrubmaster B260 R is a scrubber-drier for the wet cleaning of hard indoor
floor surfaces. This machine is intended for commercial use, e.g. in shopping
centres, swimming pools, shops, airports, schools and hotels. The
Scrubmaster B260 R with X-AC drive is additionally intended for use in
multi-storey car parks. Any use extending beyond this is not intended use. The
manufacturer is not liable for any damage resulting from this and the user alone
bears the risk. Intended use also includes compliance with the operating,
maintenance and servicing conditions specified by the manufacturer.
The Scrubmaster B260 R may be used, maintained and repaired only by
persons who are familiar with this work and instructed about the dangers.
The relevant accident prevention regulations as well as the other generally
recognised safety engineering and occupational medical rules must be
complied with.
The machine corresponds by virtue of its design and construction as well as in
the version distributed by us to the usual health and safety requirements of the
EC Directives (see Declaration of Conformity). This declaration loses its validity
in the event of a modification to the machine not authorised by us. The manu-
facturer is not deemed liable for any damage resulting from unauthorised
modifications to the machine.

Notes on warranty

The terms defined in the purchase agreement apply. Claims for compensation
in relation to damage are excluded from the terms of the warranty when the
damage is the result of the failure to observe rules concerning servicing and
maintenance. Maintenance work must be carried out by an authorised Hako
service workshop and confirmed in the "Maintenance Report", which serves as
a warranty logbook.
The following are excluded from the terms of warranty: wear and tear through
overuse, defective fuses, improper handling and use and unauthorised modifi-
cations. Claims under the terms of the warranty are also annulled when dam-
age occurs to the machine resulting from the use of parts or accessories not
explicitly approved of by us or from failure to observe maintenance rules.
3
00-7182-01.fm