Emptying The Solution Tank; Cleaning The Solution Tank - HAKO Scrubmaster B260 R Operating Manual

5.3.2

Emptying the solution tank

Fig. 33:
1. Drive to a suitable disposal centre.
2. Position the machine, ensuring the drain hose Fig. 33-27 reaches the drain
in the ground.
3. Turn off the machine.
4. Remove the drain hose from the holder, open the drain valve Fig. 33-A and
drain the waste water tank via the drain.
5. Ensure that the drain hose closure is fully closed after draining Fig. 33-B!
5.3.3

Cleaning the solution tank

1. Empty the solution tank, see section 5.3.2.
2. Undo the screw clamp Fig. 33-C with a screwdriver and remove the drain
hose Fig. 33-27.
3. Lead the water hose through the maintenance opening Fig. 33-25 and
clean the solution tank thoroughly.
4. Position the drain hose onto the support of the maintenance opening (arrow
must point to the right) and close again securely using the screw clamp.
05-7182-01.fm
Maintenance and Servicing
27
A
C
25
B
77