Labels On The Pre-Sweep Suction Unit - HAKO Scrubmaster B260 R Operating Manual

1.8

Labels on the pre-sweep suction unit

A
B
C
D
E
Fig. 3:
Label – Logo Fig. 3-A
The Hako logo is located on the front of the dirt hopper.
Type plate Fig. 3-B
The type plate is located at the rear right-hand side of the pre-sweep
suction unit.
Label – Side brush wear compensation Fig. 3-C
The labels are located on the right and left next to the side brush adjustment.
Label – Cylindrical brush wear compensation Fig. 3-D
The label is located on the cylindrical brush adjustment.
Label – Shaking system Fig. 3-E
The label is located on the left hand side of the shaking system.
01-7182-01.fm
C
A
D
B
Safety instructions
D
C
19