Lightware UMX-TPS-TX100 Series User Manual page 3


  
Symbol Legend
The following symbols and markings are used in the document:
WARNING! Safety-related information
recommended to read and keep in every case!
ATTENTION! Useful information to perform a successful procedure;
it is recommended to read.
INFO: A notice which may contain additional information. Procedure
can be successful without reading it.
DEFINITION: The short description of a feature or a function.
TIPS AND TRICKS: Ideas which you may have not known yet but can
be useful.
Navigation Buttons
Go back to the previous page. If you clicked on a link previously,

you can go back to the source page by the button.

Navigate to the Table of Contents.

Step back one page.

Step forward to the next page.
Document Information
This User's Manual applies to the following versions of the mentioned
software, firmware, and hardware:
which is highly
Lightware Device Controller (LDC) software
Lightware Device Updater V2 (LDU2) software
Controller firmware
Hardware
Document revision: 2.3
Release date: 22-08-2019
Editor: Tamas Forgacs
UMX-TPS-TX100 series – User's Manual
Item Version
1.32.0b2
1.2.5b2
UMX-TPS-TX100 series 1.3.2
WP-UMX-TPS-TX100 series 1.4.0
FP-UMX-TPS-TX100 series 1.4.0
UMX-TPS-TX100 series 2.0
WP-UMX-TPS-TX100 series 1.2
FP-UMX-TPS-TX100 series 1.2
About Printing
Lightware Visual Engineering supports green technologies and
eco-friend mentality. Thus, this document is made for digital usage
primarily. If you need to print out few pages for any reason, follow the
recommended printing settings:
Page size: A4
▪
▪ Output size: Fit to page or Match page size
▪ Orientation: Landscape
TIPS AND TRICKS: Thanks to the size of the original page, a border
around the content (gray on the second picture below) makes
possible to organize the pages better. After punching the printed
pages, they can be placed easily into a ring folder.
1 2
3
3