Hdcp Setting (Output Port); Hdmi Mode Settings (Output Port); Color Space Setting (Output Port); Query The Recent Tps Mode - Lightware UMX-TPS-TX100 Series User Manual


  
7. LW3 Programmers' Reference
7.4.21. HDCP Setting (Output Port)
HDCP capability can be set to Auto/Always on the output ports, thus, non-encrypted content can be
transmitted to a non-HDCP compliant display. See more information in the
Command and Response
SET·/MEDIA/VIDEO/<out>.HdcpModeSetting=<HDCP_mode>
Î
pw·/MEDIA/VIDEO/<out>.HdcpModeSetting=<HDCP_mode>
Í
Parameters
Identifier Parameter description
<HDCP_mode> HDCP mode
Example
Î SET /MEDIA/VIDEO/O1.HdcpModeSetting=0
Í pw /MEDIA/VIDEO/O1.HdcpModeSetting=0
7.4.22. HDMI Mode Settings (Output Port)
Command and Response
SET·/MEDIA/VIDEO/<out>.HdmiModeSetting=<mode>
Î
pw·/MEDIA/VIDEO/<out>.HdmiModeSetting=<mode>
Í
Parameters
Identifier Parameter description
<mode> HDMI mode
Example
Î SET /MEDIA/VIDEO/O1.HdmiModeSetting=2
Í pw /MEDIA/VIDEO/O1.HdmiModeSetting=2
HDCP Management section.
Value Parameter value
0 Auto
1 Always
Value Parameter value
0 Auto
1 DVI
2 HDMI 24 bit
3 HDMI 30 bit
4 HDMI 36 bit
UMX-TPS-TX100 series – User's Manual
7.4.23. Color Space Setting (Output Port)
Command and Response
SET·/MEDIA/VIDEO/<out>.ColorSpaceSetting=<colorspace>
Î
pw·/MEDIA/VIDEO/<out>.ColorSpaceSetting=<colorspace>
Í
Parameters
Identifier Parameter description
<colorspace> Color space conversion
Example
Î SET /MEDIA/VIDEO/O1.ColorSpaceSetting=2
Í pw /MEDIA/VIDEO/O1.ColorSpaceSetting=2
7.4.24. Query the Recent TPS Mode
Command and Response
Î GET·/REMOTE/<port>. tpsModeSetting
Í pr·/REMOTE/<port>. tpsModeSetting
Parameters
Identifier Parameter description
<mode>
Example
Î GET /REMOTE/D1.tpsModeSetting
Í pr /REMOTE/D1.tpsModeSetting =H
INFO: See more information about TPS modes in the
Value Parameter value
0 Auto
1 RGB
2 YCbCr 4:4:4
3 YCbCr 4:2:2
=<mode>
Value Parameter value
A Auto
H HDBaseT
TPS mode L Long reach
1 LPPF1
2 LPPF2
TPS Interface section.
81