Lightware UMX-TPS-TX100 Series User Manual page 55


  
5. Software Control - Lightware Device Controller
Description Function
ID Code number.
Name You can give an unique name for the desired code.
Fingerprint (hash) Fingerprint code in pronto hexa format.
Detected Indicator gives feedback about the given IR code is detected currently.
Repeat timeout (ms) You can set a timeout to avoid the involuntary code recurrence.
Action buttons for the desired IR code:
Save: saving the fingerprint.
Actions
Cancel: canceling the fingerprint.
Learn: learning the detected IR code.
You can check the detected IR codes in this panel. Pushing Clear button
Detected IR fingerprints deleting all current fingerprints and switch on or off the automatic
scrolling with the Autoscroll pipe.
20 fingerprints can be stored in the device at the same time. Each of them can be ordered to an action in
Event Manager.
Learning IR Codes
Step 1. Connect the IR detector unit to the IR IN port of the transmitter.
Step 2. Click on the Learn button.
Step 3. Turn the remote controller to the IR detector. A pop-up window appears in LDC - press your remote
button to learn.
Step 4. Once the code is received, a new window pops up in LDC - learning completed. Click OK to continue.
Step 5. Optionally type a unique name for the code in the Name text box. The default name is code#, e.g.
code0.
UMX-TPS-TX100 series – User's Manual
Ports Section for the UMX-TPS-TX100 Series Devices
User can set the name and command injection port to each sources and destinations. For more details
about IR interface see the
Infra tab - Ports window for the UMX-TPS-TX100 series devices
IR Interface section.
55