Further Information - Lightware UMX-TPS-TX100 Series User Manual


  
11. Appendix
11.10. Further Information
Limited Warranty Statement
1. Lightware Visual Engineering LLC (Lightware) warrants to all trade
and end user customers that any Lightware product purchased will be
free from manufacturing defects in both material and workmanship
for three (3) years from purchase unless stated otherwise below. The
warranty period will begin on the latest possible date where proof of
purchase/delivery can be provided by the customer. In the event that
no proof can be provided (empty 'Date of purchase' field or a copy of
invoice), the warranty period will begin from the point of delivery from
Lightware.
1.1. 25G and MODEX product series will be subject to a seven (7) year
warranty period under the same terms as outlined in this document.
1.2. If during the first three (3) months of purchase, the customer is
unhappy with any aspect of a Lightware product, Lightware will accept
a return for full credit.
1.3. Any product that fails in the first six (6) months of the warranty
period will automatically be eligible for replacement and advanced
replacement where available. Any replacements provided will be
warranted for the remainder of the original unit's warranty period.
1.4. Product failures from six (6) months to the end of the warranty
period will either be repaired or replaced at the discretion of Lightware.
If Lightware chooses to replace the product then the replacement will
be warranted for the remainder of the original unit's warranty period.
2. The above-stated warranty and procedures will not apply to any
product that has been:
2.1. Modified, repaired or altered by anyone other than a certified
Lightware engineer unless expressly agreed beforehand.
2.2. Used in any application other than that for which it was intended.
2.3. Subjected to any mechanical or electrical abuse or accidental
damage.
2.4. Any costs incurred for repair/replacement of goods that fall into
the above categories (2.1., 2.2., 2.3.) will be borne by the customer at
a pre-agreed figure.
3. All products to be returned to Lightware require a return material
authorization number (RMA) prior to shipment and this number must
be clearly marked on the box. If an RMA number is not obtained or is
not clearly marked on the box, Lightware will refuse the shipment.
3.1. The customer will be responsible for in-bound and Lightware will
be responsible for out-bound shipping costs.
3.2. Newly repaired or replaced products will be warranted to the end
of the originally purchased products warranty period.
UMX-TPS-TX100 series – User's Manual
Document Revision History
Release
Rev. Changes
date
1.0 26-09-2014 Initial version
Firmware upgrade, Event manager,
Troubleshooting sections added,
1.1 14-11-2014
LW3 programmers' reference
updated
Minor changes in software control
1.2 04-12-2014 section due to new LDC; SRVC LED
function added
WP-UMX transmitters added,
1.3 17-03-2015 certain figures
replaced
Autoselect figures changed, LDC
and LDU sections upgraded,
1.4 07-07-2015
typographical corrections and
minor formatting changes
Safety instructions updated, CE
1.5 16-12-2015 page pulled out, Wall plate rear
photo replaced
Minor updates for LDC v1.8.0 and
1.6 10-06-2016 LDU v1.3.0, updated Event Manager,
changes in LW3 structure.
1.7 09-05-2017 Minor corrections
New document format, updated
2.0 19-09-2017
LW3 prog. ref. chapter
Added supplement in connection
with FP-UMX-TPS-TX130-MKM
2.1 13-11-2018
model; 1080p120Hz signal support
info added
Added supplement in connection
with UMX-TPS-TX140-Plus, FP-
2.2 25-06-2019 UMX-TPS-TX120-MKM, and
FP-UMX-TPS-TX100-GES series
models
Added supplement in connection
with WP-UMX-TPS-TX130-US-Plus
2.3 22-08-2019 model, added MKS mounting option
for FP-UMX-TPS-TX100 series
models
Contact Us
Editor
sales@lightware.com
Laszlo
Zsedenyi
Zsolt
Marko
support@lightware.com
Laszlo
Zsedenyi
Laszlo
Zsedenyi
Lightware Visual Engineering LLC.
Laszlo
Peterdy 15, Budapest H-1071,
Zsedenyi
Laszlo
Zsedenyi
Laszlo
Zsedenyi
Tamas
Forgacs
Laszlo
Zsedenyi
Tamas
Forgacs
Judit
Barsony
Tamas
Forgacs
Tamas
Forgacs
©2019 Lightware Visual Engineering. All rights reserved. All
trademarks mentioned are the property of their respective owners.
Specifications subject to change without notice.
124
+36 1 255 3800
+36 1 255 3810
Hungary
www.lightware.com