Query The Audio Autoselect Settings; Change The Autoselect Mode - Lightware UMX-TPS-TX100 Series User Manual


  
7. LW3 Programmers' Reference
7.5.5. Query the Audio Autoselect Settings
Command and Response
Î GET·/MEDIA/AUDIO/XP.DestinationPortAutoselect
pr·/MEDIA/AUDIO/XP.DestinationPortAutoselect=<out_set>
Í
The response shows the settings of each output one by one.
Parameters
Identifier Parameter description
Two-letter code of the
Autoselect settings
1 letter
st
<out_set>
Two-letter code of the
Autoselect settings
2 letter
nd
Example
Î GET /MEDIA/AUDIO/XP.DestinationPortAutoselect
Í pr /MEDIA/AUDIO/XP.DestinationPortAutoselect=EL
Explanation
EL: the Autoselect is Enabled on output, selected mode is Last detect.
INFO: For more information about the Autoselect feature see
Value Parameter value
E Autoselect is enabled.
D Autoselect is disabled.
F First detect: the first active audio input is selected.
Priority detect: always the highest priority active
P
audio input will be selected.
Last detect: always the last attached input is
L
switched to the output automatically.
Static: the audio input follows the selected video
S
if the video signal contains embedded audio.
The Autoselect Feature section.
UMX-TPS-TX100 series – User's Manual
7.5.6. Change the Autoselect Mode
Command and Response
Î CALL·/MEDIA/AUDIO/XP:setDestinationPortAutoselect(<out>:<out_set>)
Í mO·/MEDIA/AUDIO/XP.setDestinationPortAutoselect
Parameters
See at previous section.
Example 1
Î CALL /MEDIA/AUDIO/XP:setDestinationPortAutoselect(O1:EL)
Í mO /MEDIA/AUDIO/XP:setDestinationPortAutoselect
The setting is changed to EPM: Autoselect is enabled (E); the mode is set to Priority detect (P), and the port will
be disconnected if a higher priority port becomes active (M).
Example 2
Î CALL /MEDIA/AUDIO/XP:setDestinationPortAutoselect(O1:D)
Í mO /MEDIA/AUDIO/XP:setDestinationPortAutoselect
The setting is changed to DPM Autoselect is disabled (D). The other settings remain unchanged. Since the
outputs are linked, the change will affect local and link out.
INFO: For more information about the Autoselect feature see
84
The Autoselect Feature section.