Stopbits Setting; Parity Setting; Operation Mode; Command Injection Enable - Lightware UMX-TPS-TX100 Series User Manual


  
7. LW3 Programmers' Reference
7.8.4. Stopbits Setting
Command and Response
SET·/MEDIA/UART/<port>.StopBits=<stopbits>
Î
pw·/MEDIA/UART/<port>.StopBits=<stopbits>
Í
Parameters
Identifier Parameter description
<stopbits> Stopbits value
Example
Î SET /MEDIA/UART/P1.StopBits=0
Í pw /MEDIA/UART/P1.StopBits=0
7.8.5. Parity Setting
Command and Response
Î SET·/MEDIA/UART/ <port>.Parity=<parity>
pw·/MEDIA/UART/<port>.Parity=<parity>
Í
Parameters
Identifier Parameter description
<parity>

Parity setting

Example
Î SET /MEDIA/UART/P1.Parity=0
Í pw /MEDIA/UART/P1.Parity=0
Value Parameter value
0 1
1 1,5
2 2
Value Parameter value
0 None
1 Odd
2 Even
UMX-TPS-TX100 series – User's Manual
7.8.6. RS-232 Operation Mode
Command and Response
SET·/MEDIA/UART/<port>.Rs232Mode=<mode>
Î
pw·/MEDIA/UART/<port>.Rs232Mode=<mode>
Í
Parameters
Identifier Parameter description
<stopbits>
Example
Î SET /MEDIA/UART/P1.Rs232Mode=1
Í pw /MEDIA/UART/P1.Rs232Mode=1
INFO: See more information about RS-232 modes in the
7.8.7. Command Injection Enable
Command and Response
SET·/MEDIA/UART/<port>.CommandInjectionEnable=<logical_value>
Î
pw·/MEDIA/UART/<port>.CommandInjectionEnable=<logical_value>
Í
Parameters
Identifier Parameter description
Command injection
<logical_value>
enable/disable setting
Example
Î SET /MEDIA/UART/P1.CommandInjectionEnable=true
Í pw /MEDIA/UART/P1.CommandInjectionEnable=true
INFO: The Command
/MEDIA/UART/<serial_port>.CommandInjectionStatus.
Value
0 Pass-through
Stopbits value 1 Control
2 Command injection
Technical Background
Value
true Command injection is enabled.
false Command injection is disabled.
injection status is stored in another
89
Parameter value
section.
Parameter value
read-only property: