Port Properties Windows; Analog Video Inputs; Digital Video Inputs - Lightware UMX-TPS-TX100 Series User Manual


  
5. Software Control - Lightware Device Controller
5.5. Port Properties Windows
Clicking on the port tile opens the Port properties window. This section
shows the available settings and status information by port types.
5.5.1. Analog Video Inputs
Port properties windows of VGA and DVI-A input ports provide similar
settings and status information:
Port properties window of the VGA video input
UMX-TPS-TX100 series – User's Manual
Available settings:
▪ Mute/unmute the port;
Lock/unlock the port;
▪
Source: Auto / RGB / YUV;
▪
▪ Analog options, see the details below;
▪ No sync screen: configuration settings of the
Frame Detector;
▪
▪ Reloading factory default settings for the selected port.
Analog Options
Analog video signals are digitized on the input. The timing parameters
can be adjusted here if needed. Timing presets can be saved for each
resolution separately. User has 32 user presets to store different
timing data.
Analog options and Presets windows in LDC
5.5.2. Digital Video Inputs
Clicking on the HDMI, DisplayPort, or DVI-D input port icon results
opening the Port properties window. The most important information
and settings are available from the panel.
Test Pattern;
Port properties window of the HDMI video input
Available settings:
▪ Mute/unmute the port;
Lock/unlock the port;
▪
▪ HDCP setting (enable / disable);
▪ No sync screen: configuration settings of the
Frame Detector;
▪
▪ Reloading factory default settings for the selected port.
44
Test Pattern;