Query The Status Of Destination Port; Query The Audio Crosspoint Setting; Switching Audio Input - Lightware UMX-TPS-TX100 Series User Manual


  
7. LW3 Programmers' Reference
Example and Explanation (for input 2, M000B):
M 0
0 0 0 0 0 0
Unlocked,
Muted
Reserved Reserved Reserved
The Most Common Received Port Status Responses
T 0
T000A
0 0 0 0
Unlocked,
Unmuted
Reserved Reserved
T 0
T000B
0 0 0 0
Unlocked,
Unmuted
Reserved Reserved
T 0
T000F
0 0 0 0
Unlocked,
Unmuted
Reserved Reserved
Only for Phoenix audio port: Character 5 is C (11 00) which means signal is present but the cable connection
status is unknown. The explanation is Phoenix connector has no pin which can indicate the connection
status so this is always unknown.
T 0
T000C
0 0 0 0
Unlocked,
Unmuted
Reserved Reserved
0 0
0 0 0 0 0 0 1 0
Reserved Reserved Reserved No signal
0 0
0 0 0 0 0 0 0 0 1 0
Reserved Reserved Reserved Reserved No signal
0 0
0 0 0 0 0 0 0 0 1 0
Reserved Reserved Reserved Reserved No signal
0 0
0 0 0 0 0 0 0 0 1 1
Reserved Reserved Reserved Reserved Signal presents
0 0
0 0 0 0 0 0 0 0 1 1
Reserved Reserved Reserved Reserved Signal presents
UMX-TPS-TX100 series – User's Manual
7.5.2. Query the Status of Destination Port
B
Command and Response
1 1
Î GET·/MEDIA/AUDIO/XP.DestinationPortStatus
pr·/MEDIA/AUDIO/XP.DestinationPortStatus=<out1_state>
Í
Connected
The response contains 5 ASCII characters for each port. The first character indicates the mute/lock state,
the next 2-byte long HEX code showing the current state of the output port.
A
Example
1 0 Î GET /MEDIA/AUDIO/XP.DestinationPortStatus
Í pr /MEDIA/AUDIO/XP.DestinationPortStatus=T000F
Not connected
Legend
B
See at previous section.
1 1
Example and Explanation
Connected
T
F
Unlocked,
1 1
Unmuted
Connected
7.5.3. Query the Audio Crosspoint Setting
Command and Response
Î GET·/MEDIA/AUDIO/XP.DestinationConnectionList
pr·/MEDIA/AUDIO/XP.DestinationConnectionList=<in>
C Í
Example
0 0
Î GET /MEDIA/AUDIO/XP.DestinationConnectionList
Unknown
Í pr /MEDIA/AUDIO/XP.DestinationConnectionList=I5
I5 input port is connected to the output port.
7.5.4. Switching Audio Input
Command and Response
Î CALL·/MEDIA/AUDIO/XP:switch(<in>:<out>)
Í mO·/MEDIA/AUDIO/XP:switch
Example
Î CALL /MEDIA/AUDIO/XP:switch(I2:O1)
Í mO /MEDIA/AUDIO/XP:switch
0 0
0 0 0 0 0 0 0 0
Reserved Reserved Reserved Reserved
83
0 F
0 0 0 0 1 1 1 1
Signal
Reserved Reserved Connected
presents