Lightware UMX-TPS-TX100 Series User Manual page 103


  
8. Firmware Upgrade
Discovering the Devices
After launching LDU2 the device discovery process starts finding the Lightware devices on the network.
Device discovery is in progress in LDU2
UMX-TPS-TX100 series – User's Manual
Device List
When the discovery has completed, the devices available on the network are listed in the application.
Legend of the Icons
Icon
Identify the device

IP address editor

Further information available

Service mode
Name Description
Clicking on the icon causes all front panel LEDs blink in
green for 10 seconds. The feature helps to identify the
device itself in the rack shelf.
To modify IP address settings quickly it is not necessary to
enter the device's settings/network menu, you can set them
by clicking the pencil icon beside the IP address.
Device is unreachable. Change the IP address using the
front panel LCD menu or the IP address editor of the LDU2.
The device is in bootload (service) mode. The firmware
upgrade procedure can be continued in this mode.
103