Query The Validity Of A Dynamic Edid; Query The Preferred Resolution Of An User Edid; Emulating An Edid To An Input Port; Emulating An Edid To All Input Ports - Lightware UMX-TPS-TX100 Series User Manual


  
7. LW3 Programmers' Reference
7.14.2. Query the Validity of a Dynamic EDID
Command and Response
Î GET·/EDID/D/<dynamic>.Validity
pr·/EDID/D/<dynamic>.Validity=<logical_value>
Í
Parameters
The <logical_value> can be true or false.
Example
Î GET /EDID/D/D1.Validity
Í pr /EDID/D/D1.Validity=true
7.14.3. Query the Preferred Resolution of an User EDID
Command and Response
Î GET·/EDID/U/<user>.PreferredResolution
pr·/EDID/U/<user>.PreferredResolution=<resolution>
Í
Example
Î GET /EDID/U/U2.PreferredResolution
Í pr /EDID/U/U2.PreferredResolution=1920x1080p60.00Hz
7.14.4. Emulating an EDID to an Input Port
Command and Response
Î CALL·/EDID:switch(<dynamic|user|factory>:<emulated>)
Í mO·/EDID:switch
Example
Î CALL /EDID:switch(F49:E2)
Í mO /EDID:switch
7.14.5. Emulating an EDID to All Input Ports
Command and Response
Î CALL·/EDID:switchAll(<dynamic|user|factory>)
Í mO·/EDID:switchAll
Example
Î CALL /EDID:switchAll(F47)
Í mO /EDID:switchAll
UMX-TPS-TX100 series – User's Manual
7.14.6. Copy an EDID to User Memory
Command and Response
Î CALL·/EDID:copy(<dynamic|emulated|factory|user>:<user>)
Í mO·/EDID:copy
Example
Î CALL /EDID:copy(D1:U1)
Í mO /EDID:copy
The EDID of the last connected sink of D1 (Output 1) has been copied to U1.
7.14.7. Deleting an EDID from User Memory
Command and Response
Î CALL·/EDID:delete(<user>)
Í mO·/EDID:delete
Example
Î CALL /EDID:delete(U1)
Í mO /EDID:delete
7.14.8. Resetting the Emulated EDIDs
Command and Response
Î CALL·/EDID:reset()
Í mO·/EDID:reset
Example
Î CALL /EDID:reset()
Í mO /EDID:reset
Calling this method switches all emulated EDIDs to factory default one. See the table in the
section.
97
Factory EDID List