Mute Audio Output; Unmute Audio Output; Lock Output; Unlock Output - Lightware UMX-TPS-TX100 Series User Manual


  
7. LW3 Programmers' Reference
7.5.13. Mute Audio Output
Command and Response
Î CALL·/MEDIA/AUDIO/XP:muteDestination(<out>)
Í mO·/MEDIA/AUDIO/XP:muteDestination
Example
Î CALL /MEDIA/AUDIO/XP:muteDestination(O1)
Í mO /MEDIA/AUDIO/XP:muteDestination
7.5.14. Unmute Audio Output
Command and Response
Î CALL·/MEDIA/AUDIO/XP:unmuteDestination(<out>)
Í mO·/MEDIA/AUDIO/XP:unmuteDestination
Example
Î CALL /MEDIA/AUDIO/XP:unmuteDestination(O1)
Í mO /MEDIA/AUDIO/XP:unmuteDestination
7.5.15. Lock Output
Command and Response
Î CALL·/MEDIA/AUDIO/XP:lockDestination(<out>)
Í mO·/MEDIA/AUDIO/XP:lockDestination
Example
Î CALL /MEDIA/AUDIO/XP:lockDestination(O1)
Í mO /MEDIA/AUDIO/XP:lockDestination
7.5.16. Unlock Output
Command and Response
Î CALL·/MEDIA/AUDIO/XP:unlockDestination(<out>)
Í mO·/MEDIA/AUDIO/XP:unlockDestination
Example
Î CALL /MEDIA/AUDIO/XP:unlockDestination(O1)
Í mO /MEDIA/AUDIO/XP:unlockDestination
UMX-TPS-TX100 series – User's Manual
7.6. Analog Audio Input Level Settings
7.6.1. Volume
Command and Response
SET·/MEDIA/AUDIO/<in>.Volume=<level>
Î
pw·/MEDIA/AUDIO/<in>.Volume=<level>
Í
Parameters
<level> Sets the input volume (attenuation) between -95.625 dB and 0 dB in step of -0.375 dB. The
value is rounded up if necessary to match with the step value.
Example
Î SET /MEDIA/AUDIO/I1.Volume=-15
Í pw /MEDIA/AUDIO/I1.Volume=-15.000
7.6.2. Balance
Command and Response
SET·/MEDIA/AUDIO/<in>.Balance=<level>
Î
pw·/MEDIA/AUDIO/<in>.Balance=<level>
Í
Parameters
<level> Sets the balance; 0 means left balance, 100 means right balance, step is 1. Center is 50
(default).
Example
Î SET /MEDIA/AUDIO/I5.Balance=75
Í pw /MEDIA/AUDIO/I5.Balance=75
Explanation
The balance level of the right audio sink is set to 75%, the left one is set to 25%.
86