5. Software Control - Lightware Device Controller
5.10.4. Front Panel
Front panel tab in Settings menu
Front panel operation LEDs and buttons can be configure in this tab.
You can disable the functionality of the front panel buttons with marking the Button lock option. This is same
method of the control lock made by the front panel buttons. See the details in the
Lock front panel enable/disable. This setting is equal with
▪
via LW3 protocol, for more details see
▪
Dark mode enable/disable: all the LEDs on the front panel of the transmitter unit are turned off 60 seconds
after enabling the dark mode. Waking up the device is available by disabling the dark mode. This
setting is also available via LW3 protocol, for more details see
▪
Enable default function for Video Select/ Audio Select/ Function button. When this property is disabled, it
means that pushing the button will not perform the original function. This makes the button free for
programming custom function by
more details see
Disable the Default Function of the Front Panel Buttons
Control Lock
Control Lock.
This configuration is also available
Lock the Front Panel Buttons
section.
Dark Mode
section.
Event
Manager. This setting is also available via LW3 protocol, for
section.
UMX-TPS-TX100 series – User's Manual
5.10.5. System
Three functions are available under System tab:
▪
Download system log - saving the file of the device.
Load factory defaults - recalling factory defaults settings and values. All factory default settings are
▪
section.
listed in the
▪
Reboot - rebooting the system.
System tab in Settings menu
Factory Default Settings
section.
61