Change The Gateway Address (Static); Port Configuration; Protocol Setting; Baud Rate Setting - Lightware UMX-TPS-TX100 Series User Manual


  
7. LW3 Programmers' Reference
7.7.8. Change the Gateway Address (Static)
Command and Response
SET·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
Î
pw·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
Í
Example
Î SET /MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
Í pw /MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
7.8. RS-232 Port Configuration
INFO: Serial port numbering can be found in the
7.8.1. Protocol Setting
Command and Response
SET·/MEDIA/UART/<port>.ControlProtocol=<protocol>
Î
pw·/MEDIA/UART/<port>.ControlProtocol=<protocol>
Í
Parameters
Identifier Parameter description
Control protocol which is
<protocol> applied on the selected
serial port
Example
Î SET /MEDIA/UART/P1.ControlProtocol=1
Í pw /MEDIA/UART/P1.ControlProtocol=1
Port Numbering section.
Value Parameter value
0 LW2 protocol
1 LW3 protocol
UMX-TPS-TX100 series – User's Manual
7.8.2. BAUD Rate Setting
Command and Response
SET·/MEDIA/UART/<port>.Baudrate=<baudrate>
Î
pw·/MEDIA/UART/<port>.Baudrate=<baudrate>
Í
Parameters
Identifier Parameter description
<baudrate>
Example
Î SET /MEDIA/UART/P1.Baudrate=2
Í pw /MEDIA/UART/P1.Baudrate=2
7.8.3. Databits Setting
Command and Response
SET·/MEDIA/UART/<port>.DataBits=<databits>
Î
pw·/MEDIA/UART/<port>.DataBits=<databits>
Í
Parameters
Identifier Parameter description
<databits>
Example
Î SET /MEDIA/UART/P1.DataBits=8
Í pw /MEDIA/UART/P1.DataBits=8
Value
0 4800
1 7200
2 9600
3 14400
BAUD rate value
4 19200
5 38400
6 57600
7 115200
Value
8 8
Databits value
9 9
88
Parameter value
Parameter value