Setting The Ip Address - Festo CPX-FB36 Electronics Description

1. Installation

1.3.4 Setting the IP address

1-18
Connection with plug from Festo
The CPX terminal is connected to the network with Festo
plugs, type NECU-M-S-D12G4-C2-ET.
The plugs are designed for network cables measuring
6...8 mm in diameter.
To comply with protection class IP65/IP67:
Use Festo plugs
•
Seal unused interfaces (
•
The IP address of bus node CPX-FB36 is alternatively set via:
– Dynamic addressing via DHCP/BOOTP (factory setting)
– Saved network settings
– Addressing via DIL switch
Note
When changes are made to the network settings of the
CPX-FB36 via DIL switch, the Modify LED "M" flashes yel-
low.
Perform a restart of the bus node so that the modified
•
network settings are applied.
section1.4)
Festo P.BE-CPX-FB36-EN en 1309NH English