Objects For Network Settings; Device Level Ring Object - Festo CPX-FB36 Electronics Description

C. EtherNet/IP Objects of the CPX-FB36
C.2

Objects for network settings

C.2.1 Device Level Ring Object
C-8
Object class: 71
Instances: 1
Attr. Access Description
No.
1 Get Network Topology:
0: Linear
1: Ring
2 Get Network Status:
0: Normal
1: Ring Fault
2: Unexpected loop detected
3: Partial network fault
4: Rapid fault / restore cycle
10 Get Active Supervisor Address:
– Supervisor IP address
– Supervisor MAC address
12 Get Capability Flags
Bit 0:
Bit 1:
Bit 2...4:
Bit 5:
Bit 6...31: reserved. Shall be set to
Bits 0 and 1 are mutually exclusive
1) EtherNet/IP specification, chapter 9-5.4
Tab. C/6: Network settings with Device Level Ring Object
d
Announce-based
1)
RingNode
Beacon-based
1)
RingNode
reserved. Shall be set to
zero
Supervisor Capable
zero
Festo P.BE-CPX-FB36-EN en 1309NH English
Type
USINT
USINT
STRUCT of
UDINT
ARRAY of
6 USINT
DWORD