Festo CPX-FB36 Electronics Description page 82

3. Commissioning
3-24
Replacing the bus node
When replacing a bus node with the setting "System start
with saved parameters", the CPX terminal is not paramet-
erised automatically by the higher-order controller.
1. Before replacing the bus node save the parameterisation
of the CPX terminal in a CPX-FMT file.
2. After replacing the bus node transfer the parameterisa-
tion to the new bus node. Use the command "Load set-
tings..." in the CPX menu.
3. Enable all settings in the "Load" window and start the
transfer to the bus node by pressing "OK".
Festo P.BE-CPX-FB36-EN en 1309NH English