1. Installation
1.1
Installation instructions
Festo P.BE-CPX-FB36-EN en 1309NH English
Warning
Switch off the following components before undertaking
installation and/or maintenance work:
– Compressed air supply
– Operating voltage supply for electronics/sensors
– Load voltage supply for outputs/valves
In this way, you can avoid:
–
sudden uncontrolled movements of loose tubing
–
unexpected movements of the connected actuators
–
undefined switching states of the electronics
Caution
The CPX bus node contains electrostatically sensitive
devices.
Therefore, do not touch any components.
•
Observe the handling specifications for electrostatically
•
sensitive devices.
They will help you avoid damage to the electronics.
Note
Use protective caps or blanking plugs to seal unused con-
nections. You will then comply with protection class
IP65/IP67 (
section 1.4).
Information about mounting the CPX terminal can be found in
the CPX system description (
P.BE-CPX-SYS).
1-3