Festo CPX-FB36 Electronics Description page 14

Contents and general instructions
Term/abbreviation
160
d
A0
h
AA, AO
AE, AI
BOOTP
Bus nodes
C
CEC
CODESYS
CP
CP module
CPX-CP interface
CPX-FMT
CPX-MMI
Tab. 0/1: CPX-specific terms and abbreviations – part 1
XII
The following product-specific terms and abbreviations are
used in this description:
Significance
Decimal numbers are marked in part by a low-set "d".
Hexadecimal numbers are marked by a low-set "h".
Analogue output
Analogue input
Dynamic protocol for automatic assignment of IP addresses (Boot
protocol, predecessor of DHCP).
A bus node connects the CPX terminal to the fieldbus or network; it
transmits control signals to the connected CPX and pneumatic modules
and monitors their operational capability.
Output
Codesys controller, e.g. CPX-CEC, applicable for control, configuration
and commissioning of CPX terminals.
Controller Development System
Compact Performance
Collective term for the various modules which can be incorporated in
the CP system (decentralised installation system).
Interface for connecting decentrally arranged CP modules to a CPX
terminal.
Festo Maintenance Tool for configuration and parameterisation of CPX
terminals.
Operator unit for commissioning and service purposes.
Festo P.BE-CPX-FB36-EN en 1309NH English