Configuration With Generic Ethernet Module - Festo CPX-FB36 Electronics Description

3. Commissioning

3.1.2 Configuration with Generic Ethernet Module

3-10
This section describes the manual configuration process of a
participant via the "RSLogix" program using a "Generic Ether-
net Module".
Integrating participants in a project
The integration of the bus node in a new RSLogix project can
only be implemented if there is no online connection between
RSLogix and the controller (
offline").
1. In the "Controller Organizer" window of the "RSLogix"
program, right-click on "Ethernet" under the "I/O Config-
uration" branch (
2. Select the option "New Module" from the context menu.
This opens the dialogue window "Select Module Type".
3. Select the "Catalog" tab and choose the module with the
description "Generic Ethernet Module" from the bottom
table.
Fig. 3/6: Integrating a bus node as a Generic Ethernet
Module
"Communications"
Fig. 3/4).
Festo P.BE-CPX-FB36-EN en 1309NH English
"Go