Network-Specific Leds - Festo CPX-FB36 Electronics Description

4. Diagnostics
M (modify) – parameterisation modified or forcing active
LED (yellow) Sequence
ON
OFF
LED flashes
1) The display of the Force function (LED flashing) has precedence over the display of the setting for
system start (LED illuminated).
Tab. 4/8: LED display M (Modify) - Part 2

4.2.2 Network-specific LEDs

Connection/data traffic (Link/Traffic)
LED TP1/2 Sequence
ON
OFF
Does not
illuminate
ON
OFF
Illuminates
green
ON
OFF
Flashes green
Tab. 4/9: LED display TPx (Link/Traffic)
Festo P.BE-CPX-FB36-EN en 1309NH English
Status
1)
– Force is active
– Network settings have
been modified
Status
No network connection /
network cable not connected
Network connection OK (Link)
Data traffic (traffic)
Flashing frequency is
dependent on the traffic.
Significance/error handling
– The force function is enabled
( system parameter force mode;
function no. 4402).
– Restart CPX-FB36 (Power OFF/ON),
( section 1.3.4)
Error handling
•
Check network connection
–
–
4-9