Festo CPX-FB36 Electronics Description page 133

B. Address assignment of the CPX terminal
Example terminal 3
modified
Module no.: 0 1
16DI
1 2
1
Modified status bits deactivated
2
Modified: 8DI module replaced by
16DI module
Fig. B/4: Example terminal 3 after extension/modification(compare with Fig. B/3)
Festo P.BE-CPX-FB36-EN en 1309NH English
The next diagram shows with terminal 3 as an example
( Fig. B/3) the effects of modifications to the address as-
signment.
The following has been changed:
– The status bits have been deactivated.
– In the case of module no. 1 an 8-input module has been
replaced by a 16-input module.
– The pneumatic interface has been set to 16 solenoid coils
(outputs) in order to reserve addresses for an extension
to the pneumatics.
2 3 4
8DI 4DO 8DI
5 6
8DO 2AO
3
3
Modified: Pneumatic interface (set
with DIL switch to 1...16 valve coils)
B-23