Festo CPX-FB36 Electronics Description page 149

C. EtherNet/IP Objects of the CPX-FB36
Obj. Instances
(= Module no. + 1)
103 1 ... 48
105 1 ... 48
107 1 ... 48
133 1 ... 48
Tab. C/15: Instance 100 member list in the Remote I/O operating mode
Festo P.BE-CPX-FB36-EN en 1309NH English
Instance 100: Output
Within the Instance Output in the Assembly Object all outputs
of the CPX system will be transmitted over the network by
means of one communication connection. The following se-
quence applies during transmission:
Sequence of transmission
1. I/O diagnostic interface/status byte, if active (16-bit
orientated)
2. Object instances of the analogue channels (16-bit orientated)
3. Instances of the technology modules (16 or 8-bit orientated)
4. Object instances of the digital outputs (8-bit orientated)
Tab. C/14: Sequence of transmission for Instance 100
Instance 100 (Output) possesses the following member list in
the operating mode Remote I/O:
Attributes Entries in member list
(channel)
1 ... 64 Digital Data
1 ... 32 Analogue channel data
1 ... 64 / Technology module
65 ... 96
0/1 I/O diagnostic interface data, if
active
Type
BOOL
WORD
BYTE/
WORD
WORD
C-15