Diagnostics Trace Object - Festo CPX-FB36 Electronics Description

C. EtherNet/IP Objects of the CPX-FB36
C.4.4 Diagnostics Trace Object
Attr. Access Name
No.
1 Get
2 Get Days
3 Get Hours
4 Get Minutes
5 Get Seconds
6 Get Milliseconds
7 Get Module
code
8 Get Module
number
9 Get Channel
number
1) d (diagnostic event) = 0 ... 39 ; most current diagnostic event = 0;
2) Measured from the time the power supply was switched on
3) If the error number = 0, the content is also 0. If the error number is between 128 ... 199
(error class 3), the content is not relevant (service case).
Tab. C/26: Attributes of the Diagnostics Trace Object - Part 1
C-24
Object class:
Instances:
An instance is created for each diagnostic entry.
Description
Marking the first entry after
Power on
Supplies 1 if it is the first
entry after Power on.
Number of days
Number of hours
Number of minutes
Number of seconds
Number of 10 msec
Module code of the module
3)
which registered the error
Module position of the
module which registered the
error; 63 = error not
module-related
Number of the first faulty
3)
channel
134
d
1 ... 40
Type
BYTE
2)
BYTE
2)
BYTE
2)
BYTE
2)
BYTE
2)
BYTE
BYTE
BYTE
BYTE
Festo P.BE-CPX-FB36-EN en 1309NH English
Function no.
1)
3488 + n
n = 10 * d + 4
(bit 7)
n = 10 * d + 0
n = 10 * d + 1
n = 10 * d + 2
n = 10 * d + 3
n = 10 * d + 4
(bits 0 ... 6)
n = 10 * d + 5
n = 10 * d + 6
(bits 6, 7)
n = 10 * d + 7
(bits 0 ... 5)