Configuration With Eds File - Festo CPX-FB36 Electronics Description

3. Commissioning

3.1.1 Configuration with EDS file

File type File name
EDS cpx_FB36.eds
cpx_FB36RC.eds
ICO cpx_FB36.ico
Tab. 3/2: Configuration files for CPX-FB36
EDS- files
Icon files
3-4
This section describes the commissioning procedure for
EtherNet/IP with an Allen-Bradley controller and the "RSLogix
5000" program from Rockwell.
The fundamental aspects of this description also apply for
other control systems.
Obtaining EDS files
Use the following EDS files for the CPX terminal with
•
CPX-FB36.
Language Description
English Provides the communication adapter in the
configuration program.
File with information for the Remote Controller
operating mode.
– Icon file for representing the CPX terminal or
mode in the configuration program.
Source www.festo.com/sp
1. Enter "CPX-FB36" in the search field.
2. Select the "Firmware and drivers" tab.
3. Click "Device description file".
4. Select a directory and save the ZIP file.
Use icon files (included in the ZIP file) to assign icons to the
CPX terminal and CPX modules.
(Dependent on the configuration program used).
Festo P.BE-CPX-FB36-EN en 1309NH English