Festo CPX-FB36 Electronics Description page 66

3. Commissioning
3-8
2. Select the command "New Module..." from the context
menu.
This opens the dialogue window "Select Module Type".
3. Select the "Catalog" tab and choose the module with the
description "CPX-FB36 Ethernet Module" from the bottom
table.
Fig. 3/5: Integrating bus node CPX-FB36
4. Confirm your selection by pressing "Create".
Configuring a participant
1. In the "Controller Organizer" window right-click on the
newly integrated module and select the "Properties" com-
mand in the context menu.
This opens the dialogue window "Module Properties".
2. Check and alter the IP address if necessary.
3. Click the "Change" button.
This opens the dialogue window "Module Definition".
Festo P.BE-CPX-FB36-EN en 1309NH English