Configuration Array Object; Slave Size Object (For Operating Mode Remote Controller - Festo CPX-FB36 Electronics Description

C. EtherNet/IP Objects of the CPX-FB36
C.4.9 Configuration Array Object
Attr. Access Description
No.
1 Get/Set Data field with all system and module parameters.
C.4.10 Slave Size Object (for operating mode Remote Controller)
Attr. Access Description
No.
1 Get Number of input bytes for the operating mode Remote Controller
2 Get Number of output bytes for the operating mode Remote Controller
C-42
The Configuration Array Object is available only for revision
statuses later than Rev. 1.2. Further information about this
Object can be found at www.festo.com/sp.
Object class: 199
Instances: 1
Object class: 136
Instances: 1
This Object is only available in the operating mode Remote
Controller. It contains the number of I/O bytes for communic-
ation of theCPX-FB36 with the CPX-FEC or CPX-CEC. The set-
ting is implemented via DIL switches on the CPX-FB36
( Tab. 1/3).
d
Type
ARRAY
d
Festo P.BE-CPX-FB36-EN en 1309NH English
Function
no.
–
Type
Sint
Sint