Festo CPX-FB36 Electronics Description page 109

A. Technical appendix
A.1 Technical data, bus node CPX-FB36
General
General technical data
Protection class to EN 60529
Protection against electric shock
(Protection against direct and indirect
contact in accordance with IEC/
DIN 60204-1)
Intrinsic current consumption at 24 V
– from operating voltage supply for
electronics/sensors (U
Galvanic isolation
– Ethernet/IP interface
Module code (CPX-specific)
Module identifier (operator unit)
Tab. A/1: Technical data – general
Communication
Transmission technology
Transmission rate
Festo P.BE-CPX-FB36-EN en 1309NH English
CPX system description P.BE-CPX-SYS-...
IP65 / IP67
CPX-FB36 completely mounted, plug connector according
to accessories, plugged in or equipped with protective
cap.
through the use of PELV circuits
(Protected Extra Low Voltage)
typ. 100 mA
)
EL/SEN
Galvanically separated
Remote I/O:
Remote Controller:
Remote I/O:
Remote Controller:
Switched Fast Ethernet;
design 100BaseTX according to IEEE 802.3
10/100 Mbit/s, full/half duplex
224
171
FB36 - EtherNet IP Remote-IO
FB36 - Modbus TCP Remote-IO
A-3