Bar Codes - Star Line Thermal/Dot Printer Specifications

3-3-10) Bar Codes

ESC b n1 n2 n3 n4 d1 . . . dk RS
[Name] Print bar code
[Code] ASCII ESC
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
<Thermal>
Bar code printing is executed according to the following parameters.
If n1, n2, n3 and n4 are acquired and detected to be out of the defined area, data up to RS is dis-
carded.
• n1: Bar Code Type Selection
n1
0, 48 UPC-E
1, 49 UPC-A
2, 50 JAN/EAN8
3, 51 JAN/EAN13
4, 52 Code39
5, 53 ITF
6, 54 Code128
7, 55 Code93
8, 56 NW-7
• n2: Character Selection Under Bar Code, and Line Feed Addition Selection
n2
1, 49 No added under-bar characters Executes a form feed after bar code is printed.
2, 50 Added under-bar characters Executes a form feed after bar code is printed.
3, 51 No added under-bar characters Does not execute a form feed after bar code is printed.
4, 52 Added under-bar characters Does not execute a form feed after bar code is printed.
STAR LIne Mode Command Specifications
b n1 n2 n3
1B 62 n1 n2 n3
27 98 n1 n2 n3
: 0 ≤ n1 ≤ 8, 48 ≤ n1 ≤ 56 ("0" ≤ n1 ≤ "8")
1 ≤ n2 ≤ 4, 49 ≤ n2 ≤ 52 ("1" ≤ n2 ≤ "4")
1 ≤ n4 ≤ 255
n3 (bar code mode), d (bar code data),
Defined area of k (bar code data count) is different depending on the bar code type.
: -
: -
: -
: -
: -
Bar Codes Types
Under-bar character selection and added line feed selection
n4 d1 .. dk RS
n4 d1 .. dk 1E
n4 d1 .. dk 30
3-58
Rev. 0.00