Parts Identification And Nomenclature; Cutter Model; Tear Bar Model - Star TSP650 SERIES Hardware Manual

2. Parts Identification and Nomenclature

2-1. Cutter Model

Printer cover
Open this cover to
load or replace paper.
Power switch
Used to turn on/off
power to the printer.
Interface connector
For connection to a
host computer.

2-2. Tear Bar Model

Printer cover
Open this cover to
load or replace paper.
Power switch
Used to turn on/off
power to the printer.
Interface connector
For connection to a
host computer.
Cover open lever
Push this lever in the direction of the
arrow to open the printer cover.
Peripheral drive connector
Connects to peripheral units such
as cash drawers, etc.
Do not connect this to a telephone.
Power connector
For connection of the AC adapter.
Never unplug the AC adapter while
the printer is on.
Cover open lever
Push this lever in the direction of the
arrow to open the printer cover.
Peripheral drive connector
Connects to peripheral units such
as cash drawers, etc.
Do not connect this to a telephone.
Power connector
For connection of the AC adapter.
Never unplug the AC adapter while
the printer is on.
– 3 –
Control panel
Features LED indicators to
indicate printer status and
switches to operate the printer.
Control panel
Features LED indicators to
indicate printer status and
switches to operate the printer.