Star Line Thermal/Dot Printer Specifications page 133

ESC GS * W
[Name] Register mark format to non-volatile memory
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function] Registers the mark format (mark height, mark line feed amount, mark color, and mark horizontal
width) in non-volatile memory.
After registration to the non-volatile memory, execute a printer reset.
ESC GS * C
[Name] Initialize mark format in non-volatile memory
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
Initializes the mark format (mark height, mark line feed amount, mark color, and mark horizontal
width) registered in non-volatile memory.
After initialization, resets the printer.
STAR Line Mode Command Specifications
ESC GS * W
1B 1D 2A 57
27 29 42 87
: -
: -
: -
: -
: -
: -
ESC GS * C
1B 1D 2A 43
27 29 42 67
: -
: -
: -
: -
: -
: -
Mark Format Initial Value
• Mark Height:
• Mark Line Feed Amount:
• Mark Color:
• Mark Horizontal Width:
"016" (16 dots)
"032" (32 dots)
"0" (White → All Mark Numbers)
"080" (80 dots) → All Mark Numbers)
3-121
Rev. 0.00