Star Line Thermal/Dot Printer Specifications page 128

(Note) The registered data is shared by all stations and modes.
If this command is used frequently, there is the possibility of damaging the non-volatile
memory. Write to the non-volatile memory less than 10 times in one day.
Relationship of logo and registered data
xn = xn1 + xn2 x 256, yn = yn1 + yn2 x 256
(yn1 + yn2 x 256) bite
(yn1 + yn2 x 256) x 8 dot
STAR LIne Mode Command Specifications
{ (xn 1 + xn2 x 256) x 8 } dot
d(11) d(21)
d(22)
d(12)
d(x1) d(x2)
3-116
d(n1)
d(n2)
d(xn)
Rev. 0.00
Data
MSB
LSB