Star Line Thermal/Dot Printer Specifications page 63

ESC k n1 n2 d1 ... dk
[Name] Fine bit image
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
<Thermal>
Prints bit images using 1 dots wide and 1 dots high per 1 dot of input data.
The following shows the details of data processing with this command.
• When {(n1 + n2 x 256) x 8} exceeds the printable region, only the data in the printing region is
printed.
• When {(n1 + n2 x 256) x 8} exceeds the currently set printable region, only the data in the printing
region is printed.
At this time, all data for the print region is discarded.
• If the current position already exceeds the print region, this command discards all data.
24 dot
<Slip>, <Validation>
All data received and discarded.
STAR Line Mode Command Specifications
ESC k n1 n2 d1
1B 6B n1 n2 d1
27 107 n1 n2 d1
: n2 = 0
1 ≤ {(n1 + n2 x 256) x 8} ≤ printable region
k = {(n1 + n2 x 256) x 24}
0 ≤ d ≤ 255
: -
: -
: -
: -
: -
x byte =(n1 + n2 x 256)
d1 d2
dX x 1 + 1 dX x 1 + 2
dX x 2 + 1 dX x 2 + 2
dX x 23 + 1
dX x 23 + 2
bit7 bit6 bit5
.. dk
.. dk
.. dk
dX
dX x 2
dX x 3
dX x 24
bit1
bit4 bit3 bit2 bit0
3-51
Rev. 0.00