Table of Contents
Advertisement
ESC GS / 5 n
[Name]
Set command character switching method
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
Thermal
Slip
Validation
[Initial Value]
Thermal
Slip
Validation
[Function]
<Thermal>
Sets command character conversion method for the Auto Logo function.
This setting is registered to non-volatile memory by the ESC GS / W command.
This command is ignored while Auto Logo is executing.
n
0
Does not print command character or logo number continuing after that.
1
Converts the command character and logo number that follows in a space character (0 x 20).
If "/" is specified for the command character, the "/2" embedded in the print data is processed not as
a character string but as a command.
At that time, "/2" is processed as a command so there is no print.
However, "/2" is converted to a space by the n = 1 specification of this command.
<Slip>, <Validation>
Only setting is valid
Setting is valid after switching to thermal.
STAR LIne Mode Command Specifications
ESC
GS
/
5
1b
1d
2f
35
27
29
47
53
:
0 ≤ n ≤ 1
:
-
:
-
:
n = 0
:
-
:
-
n
n
n
Setting
3-130
Rev. 0.00
Advertisement
Table of Contents
