Table of Contents
Advertisement
3-17) MICR Related Command Details
The following commands control MICR functions.
The following commands are effective only on models equipped with MICR.
ESC FS M m n
[Name]
MICR function
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
Thermal
Slip
Validation
[Initial Value]
Thermal
Slip
Validation
[Function]
<Thermal>, <Validation>
Five bytes ignored
<Slip>
Performs operations on inserted slip paper (cleaning paper).
Note that if slip paper has been inserted, and already is targeted for printing, that slip paper is dis-
charged to the back (the forward direction), and operations are performed on the newly inserted slip
paper (cleaning paper).
m
48
Reads format specified by n, and returns read character string.
n=48 • • • E13B read format
n=49 • • • CMC7 read format
Reading successful • • • ESC FS M 0 n, read character string LF NUL
Reading failed • • • ESC FS M 0 n, LF NUL
49
Reads with format specified by n, and returns read character string.
If no slip paper has been inserted, an empty character is returned immediately that indicates
no insertion.
n=48 • • • E13B read format
n=49 • • • CMC7 read format
Reading successful • • • ESC FS M 1 n, read character string LF NUL
Reading failed • • • ESC FS M 1 n, LF NUL
Empty character string • • • ESC FS M 1 n LF NUL
50
Performs cleaning of the conveyance rollers and magnetic head by inserted cleaning paper.
n is 48 or 49.
In page mode, five bytes ignored.
STAR Line Mode Command Specifications
ESC
FS
M
m
n
1B
1C
4D
m
n
27
28
77
m
n
:
-
:
48 ≤ m ≤ 50 ("0" ≤ m ≤ "2")
n = 48, 49
:
-
:
-
:
-
:
-
Function
3-161
Rev. 0.00
Advertisement
Table of Contents
