Bit Image Graphics - Star Line Thermal/Dot Printer Specifications

3-3-8)

Bit Image Graphics

ESC K n1 n2 d1 ... dk
[Name] Standard density bit image
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
<Thermal>
Prints bit images using 3 dots wide and 3 dots high per 1 dot of input data.
The following shows the details of data processing with this command.
• When {(n1 + n2 x 256) x 3} exceeds the printable region, only the data in the printing region is
printed.
• When {(n1 + n2 x 256) x 3} exceeds the currently set printable region, only the data in the printing
region is printed.
At this time, all data for the print region is discarded.
• If the current position already exceeds the print region, this command discards all data.
STAR LIne Mode Command Specifications
ESC K n1 n2 d1
1B 4B n1 n2 d1
27 75 n1 n2 d1
: 1 ≤ {(n1 + n2 x 256) x 3} ≤ printable region
k = (n1 + n2 x 256)
0 ≤ d ≤ 255
:
1 ≤ (n1 + n2 x 256) ≤ printable region (total dot count)
k = (n1 + n2 x 256)
0 ≤ d ≤ 255
:
1 ≤ (n1 + n2 x 256) ≤ printable region (total dot count)
k = (n1 + n2 x 256)
0 ≤ d ≤ 255
: -
: -
: -
.. dk
.. dk
.. dk
b7 b6 b5 b4
3-48
b3 b2
b1 b0
Rev. 0.00