Table of Contents
Advertisement
Example of Use
1)
Register logo to use as the water mark as logo #1.
2)
Water mark function is valid.:
3)
Transmit print data:
4)
Trigger command transmission:
<Slip>, <Validation>
Only setting is valid
Setting is valid after switching to thermal.
(Note) When using this function, the data volume for one page should be within the printer's
buffer length.
STAR LIne Mode Command Specifications
ESC GS h 1 k m n (k=0x02, m=0x01, n=0x01)
Print data (print length is within the length of the image buffer)
ESC d n (cutter command is water mark printing trigger)
3-150
Rev. 0.00
Advertisement
Table of Contents
