Star Line Thermal/Dot Printer Specifications page 90

<Slip>, <Validation>
The defined ranges are shown below.
Specifications
Japanese Language Kanji characters
They are designed as shown below and data is sent sequentially.
d1
MSB
LSB
Vertical
16 dot
d2
MSB
LSB
The font of Kanji download characters is composed of 16 x 16 dot patterns.
Bits that correspond to the dots to print are "1," and the bits that correspond to the dots that are not printed are "0."
When page mode is selected, only registration is possible.
Printing is possible after switching to line mode.
Registered data is shared by slip and validation.
STAR LIne Mode Command Specifications
c1
c1 = 77h
Horizontal 16 dot
d3 d5 d7 d9 d11 d13 d15 d17 d19 d21 d23 d25 d27 d29 d31
d4 d6 d8 d10 d12 d14 d16 d18 d20 d22 d24 d26 d28 d30 d32
c2
21h ≤ c2 ≤ 7Eh
3-78
Registration count
94 Characters
Rev. 0.00