Table of Contents
Advertisement
ESC GS h 1 k m n
[Name]
Water mark function
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
Thermal
Slip
Validation
[Initial Value]
Thermal
Slip
Validation
[Function]
<Thermal>
Sets to make water mark function valid/invalid.
k
0
Invalid
1
Valid
Prints one logo specified by n at the position centered in the horizontal and vertical
directions.
2
Valid
Repeatedly prints logo specified by n from leading edge of the page to the trailing end of the
page, at the position centered in the horizontal direction.
Set the forming method of the logo data to be printed as the water mark to make the image appropri-
ate as the water mark with this setting.
If the appropriate image is not possible with this setting, re-register after forming the logo data regis-
tered as the water mark as the appropriate data.
m
0
Prints logo data specified n as it is.
1
Thins logo data specified n 25% in the printout.
2
Thins logo data specified n 12.5% in the printout.
Specify the registered logo as the water mark.
n
1 to 255
Registered logo number
If the specified logo number is not registered, the water mark will not be printed.
<Water Mark Function>
When the water mark inversion function is valid, it is printed by the water mark pinting trigger.
However, this function is executed on print data that fits in the image buffer length.
If print data is larger than the image buffer length, water mark printing is ignored.
Also, when starting printing using anything other than the water mark printing trigger, water mark
printing is ignored.
When in 2-color printing mode, this function is invalid.
This setting is not cleared by the ESC @, CAN commands.
Water Mark Printing Triggers
• Cutter Command
• FF Command
• BM Detection Command
• Print Startup Command
• Raster Mode
STAR Line Mode Command Specifications
ESC
GS
h
1
1B
1D
68
31
27
29
104
49
:
0 ≤ k ≤ 2, 0 ≤ m ≤ 2, 1 ≤ n ≤ 255
:
-
:
-
:
-
:
-
:
-
Water Mark Function
Water Mark Data Forming
: ESC d n
: FF
: ESC d n, FF
: ESC GS g 0 m n
: When executing FF
k
m
n
k
m
n
k
m
n
Logo Number
3-149
Rev. 0.00
Advertisement
Table of Contents
